Childers Encacel V Vapor Barrier Coating | CP-45 | Industrial HVAC Use | USA

Description:
Childers Encacel V CP-45 Vapor Retarder Coating is an elastomeric, polymer-based coating specifically formulated for vapor retardation and weatherproofing. It is designed to protect various types of insulation, including sprayed, board, and block insulation. ENCACEL V CP-45 is known for its exceptional adhesive qualities, outstanding flexibility, and superior vapor retarder properties.

Key Points:
⦁ Finish for all cold insulation systems.
⦁ It is also recommended for hot, exterior, sprayed polyurethane applications.
⦁ In both cases, Childers Encacel V CP-45 Vapor Retarder Coating is used as the finish coat after flashing and sealing all metal protrusions throughout the surface of the insulation.
⦁ Childers Encacel V CP-45 Vapor Retarder Coating can be used as a decorative finish over closed-cell, flexible, cellular plastics.
⦁ Care must be taken that the adhesive-bonded joint is not adversely affected by the solvent in the vapor retarder.
⦁ It is not to be used in direct contact with polystyrene foam insulation.
⦁ Childers Encacel V CP-45 Vapor Retarder Coating can be applied by spray or brush (for applying by glove or trowel, ENCACEL X CP-40 vapor retarder coating is recommended).
⦁ With its excellent bridging properties, Childers Encacel V CP-45 Vapor Retarder Coating will provide a smooth finish, even over relatively rough substrates.
⦁ On large exterior surfaces, such as sprayed polyurethane foam, airless spray provides the most economical and efficient method of application.
⦁ Over sprayed polyurethane foam, a two-coat, two-color system is suggested to eliminate voids and holidays.
⦁ It is suggested that Childers Encacel V CP-45 Vapor Retarder Coating be stored at a minimum of 50°F (10°C) just prior to application to achieve optimum results.
⦁ Outdoor horizontal surfaces must always drain completely.
⦁ A pitch of at least 1/2” per foot (4 cm/m) is recommended. Childers Encacel V CP-45 Vapor Retarder Coating will not check or crack in exterior applications.
⦁ The cured film of Childers Encacel V CP-45 Vapor Retarder Coating is fire-resistive and tough, yet flexible.
⦁ It is resistive to many acids and alkalis.
⦁ The excellent spray characteristics of the product minimizes the possibility of “pin-holing”, resulting in a uniform, monolithic film.
⦁ Cetified
⦁ This product has been tested according to ASTM E84 (Surface Burning Characteristics of Building Materials).